Heavy Equipment Area Floor Philippines

Self-Leveling Epoxy for Heavy Equipment Area Philippines

Surface Condition

This Heavy Equipment Floor in the Philippines has a newly constructed concrete.

Surface Preparation

We prepared the surface using a Planetary Floor Grinder with a diamond grinding attachment to open the concrete pores to ensure maximum bond strength of the primer. All this grinding was done with our Industrial Vacuum to prevent dust contamination of the stocks. We then used Majestic Concrete Cleaner to some parts to remove the deep seeded oil and dirt.

Primer and Repair

We applied Majestic Epoxy Primer to the entire area, after curing we then used Majestic Epoxy Putty to fill in the craters and cracks to ensure a smooth finish free from cracks and divots.


We then applied a 2mm thick Majestic Self-Leveling Topcoat that can easily handle the heavy traffic day in day out. The coating can handle up to 10,000 psi compressive strength more than enough for the area.


This was a successful Heavy Equipment Floor Philippines that required only 6 days for 2,000 sqm with one day curing for foot traffic and 3 days curing for forklift traffic. Full cure was 7 days for the full Chemical Resistance.